Series of three filters for replacement: Ionizing filter, KDF Zeo filter and Hollow fiber membrane.
We remind you that, according to the regulations in force, the filters must be replaced at least once a year.
The replacement of the Lotus filters is performed at the Athena laboratories. At the customer's request we can send a refurbished Lotus with new filters as a replacement. In this way the customer obtains continuity in the water supply service.
The courier delivers the new Lotus and collects the old one.
PRICE INCLUDING VAT
REQUEST TO CHANGE MACHINE WITH NEW FILTERS
DISCONNECTION OF THE MACHINE (time required 10 minutes)
1. Close the plastic tap located on the pipe that carries the mains water to the Lotus.
2. Disconnect the three connecting pipes to the Lotus by pressing the ring on the outside of the black manifold with your fingers (see photo). Mark the three tubes to recognize them at the time of connection (a tip is to attach different patches or colored adhesive tape to distinguish the tubes).
3. Drain the water contained in the Lotus by placing it at an angle on the sink.
4. Place the Lotus in a plastic bag and place it in the box it was delivered with, waiting for the courier.
CONNECTION OF THE NEW MACHINE (time required 10 minutes)
1. Unpack the new overhauled machine and with the new filters (if possible, keep the box for the next annual replacement).
2. Insert the three tubes into the three black manifolds. Be careful to push the tube as far as it will go. Once inserted, the fitting is able to withstand up to 10 thrust atmospheres offering maximum peace of mind.
3. Open the plastic tap taking care to place it at the right angle to deliver 1 - 1.5 liters max per minute. If necessary, time the filling of a 1 liter bottle to adjust it again.